How to Print Wall Murals on a Wall Printing Machine

Murals are a great way to decorate your home or business. They’re also a great way to personalize and add style to any room. You can print them on canvas, but the best results come from using a wall printing machine to print large murals directly on your wall. Wall printing machines are available in many sizes, so you can find one that is just right for your project’s needs!

Clean the wall with soap, water, and a handheld brush.

It is important to clean the wall before you print your mural. To do this, use soap and water to remove dirt or grime from the walls. Next, use a soft brush, sponge, and scraper to get into all the corners of the wall. Also, make sure you get rid of any grease or oil stains by using a handheld steamer.

Cover the floor and wall with drop clothes to protect them.

To prevent the adhesive from getting on your floor and walls, cover them with drop cloths. Roll the adhesive onto the wall using a roller. Use a spray bottle to apply it to the wall, or brush it on by hand.

Apply a base coat of paint.

Once the mural is properly fixed to the wall, you can apply a base coat of paint. This will help prevent any peeling or chipping of your mural when you eventually remove it from the wall.

You may use a roller for this step to ensure that no stray drips get on your mural. Rollers create a thin layer of paint that dries quickly and adheres very well to our specially formulated adhesive sheets. If you opt not to use a roller, use a sponge roller or brush for small sections at a time so that each section has ample time to dry before moving on to another section.

Set up your equipment.

To ensure that your wall print comes out as intended, it is important to set up your equipment correctly. This includes making sure that you have the right paper and ink, as well as making sure that the printer itself is calibrated properly.

  • Get the right paper:The type of paper used in printing can affect how easy or difficult it is to print a mural. For example, suppose you are using a thicker type of material, such as canvas or linen. In that case, you might need more adhesive than normal because these types of materials tend to be heavier than standard poster boards.
  • Make sure the printer is calibrated:If your printer has been sitting around for a while without being used much (like five years). There may be some parts inside that are not working very well anymore due to dust buildup or other issues with circulation over time – this could impact how effectively your machine works when trying to print large pieces onto large sheets! Therefore, you should always make sure everything inside works properly before starting any job like this one where accuracy matters for quality purposes too.”

Please turn on the printer and run an align print to calibrate it.

Before you begin printing, make sure that the printer is turned on and connected to your computer. Next, run an align print on the printer so it can calibrate itself. This will take a few minutes, but you’re good to go once it’s done!

Using spray adhesive, apply a light coating of adhesive to the back of the mural paper from left to right.

  • Spray adhesive:If you’re using spray adhesive, use it in a well-ventilated area. Apply a light coating of adhesive from left to right on the end of your mural paper roll, then apply another coat from top to bottom.
  • Adhesive roller:If you use an adhesive roller, ensure that all surfaces are clean and dry before applying the rollers (and keep them clean for each new roll). This method allows for even application without any dripping or excess air bubbles being trapped under the print surface that could cause peeling later on down the line—which would be pretty annoying!

Spray the wall with adhesive from left to right.

Spray the wall with adhesive from left to right.

Apply a light adhesive coating to the back of the mural paper from left to right. Spray the wall with adhesive, making sure not to overspray, or else you’ll have excess liquid dripping off your brush, which will cause wrinkling and bubbling in your mural. Apply all over in one direction only—do not rub it on! This step is crucial for getting good adhesion between your spray adhesive and your mural paper. If you’re working outside or somewhere windy, wait until there are no breezes before spraying; otherwise, those gusts could ruin your entire project by blowing away some of that tough-to-apply spray glue (not cool).

Roll out the mural paper on the wall, smoothing outward from the center toward each edge.

  • Roll out the mural paper on a flat surface. Your mural paper should be rolled out opposite how it will be applied to the wall.
  • Use a roller to smooth the paper down and outward from the center toward each edge.

Set up the printer for printing and then manually feed the mural paper into the printer for printing.

The first thing you need to do is set up your printer for mural printing. To do this, follow these steps:

  • First, make sure the printer is set to print on the right side of the paper.
  • Make sure that it’s set to print in the right size.
  • Finally, make sure it’s set to print at the right speed and pressure.

You can use a wall printing machine to print larger murals on your walls

A wall printing machine is an option that you can use to create larger murals on your walls. This is a superior option over manual paint brushes as it is faster, more precise, and affordable. The wall printing machine will make it much easier for you to create bigger murals on the walls of your home or business establishment.


You can use a wall printing machine to print larger murals on your walls. You will need to clean the surface thoroughly with soap and water before starting and cover the floor with drop cloths for protection. After applying a base coat of paint, set up your equipment and calibrate it by running an aligned print through the printer. Now that everything is ready lay your mural paper on top of the wall and spray both sides with adhesive. Then roll out from left to right until smooth across the entire surface before feeding into the machine for the printing process.



Polly is an outdoor enthusiast who loves sharing her passion for the great outdoors with others. she isan experienced hiker, backpacker, and camper, and she enjoy exploring new trails and camping spots. she also love fishing, kayaking, and canoeing, and she isalways looking for new ways to get out on the water. she isa certified Wilderness First Responder and have a lot of experience in backcountry survival skills. she isalso a firearms instructor and enjoy teaching people how to safely handle firearms. When she isnot outdoors, she work as a software engineer.

Press ESC to close